Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

Special Hazards Suppression and the NFPA Standards in Drawings One Topic on Every Page

For fire protection techs moving from sprinklers or fire alarm into suppression. Clean agent, CO2, wet chemical and releasing panels: one topic per page, the drawing first, then the numbers to remember. 64 illustrated pages.

GET THE 64 ILLUSTRATED PAGES

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach system drawn from detector to nozzle, with the explanation right next to it
64 illustrated pages8 parts, from why water isn't always the answer to the field checklists
Up-to-date sourcesChecked against NFPA 2001, 12, 12A, 17, 17A, 11, 72 and 96
PDF by emailFormat

Look Inside the Book

Each page has one big drawing and a box with the numbers and steps you need to know:

Data center, switchgear, archive, flammable liquids and kitchen: which system each hazard calls for
Data center, switchgear, archive, flammable liquids and kitchen: which system each hazard calls for
Inputs: detectors, manual release, abort, supervisory. Outputs: alarms, shutdowns, release.
Inputs: detectors, manual release, abort, supervisory. Outputs: alarms, shutdowns, release.
Halocarbons discharge in 10 s; inert gases in 60 s (120 s for Class A surface/C).
Halocarbons discharge in 10 s; inert gases in 60 s (120 s for Class A surface/C).
34% CO2 is the minimum design concentration, and it is lethal (EPA, NFPA 12).
34% CO2 is the minimum design concentration, and it is lethal (EPA, NFPA 12).
Fryer before, during and after discharge: saponification plus cooling, UL 300 listed systems.
Fryer before, during and after discharge: saponification plus cooling, UL 300 listed systems.
Foam = concentrate + water + air, usually proportioned at 1%, 3% or 6% (NFPA 11).
Foam = concentrate + water + air, usually proportioned at 1%, 3% or 6% (NFPA 11).
Monthly, 6 months, 12 months, 5 years, 12 years: the whole ITM calendar on one strip.
Monthly, 6 months, 12 months, 5 years, 12 years: the whole ITM calendar on one strip.
10 s, 60 s, 10 min, × 1.2, × 1.3, 34%, 850 psi, 300 psi: one sheet to print.
10 s, 60 s, 10 min, × 1.2, × 1.3, 34%, 850 psi, 300 psi: one sheet to print.

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 8 parts and 60 topics.

The Problem Isn't You. It's How It Was Explained to You.

You're in a server room with two cylinder banks on the wall, one halocarbon and one inert gas. The client asks why the inert gas bank is so much bigger, and why it takes longer to discharge.

You've read it. But NFPA 2001 covers it in paragraphs, with agent types in one chapter and discharge times in another. Nothing connects when someone is standing there waiting for an answer.

Halocarbons discharge in 10 s; inert gases in 60 s (120 s for Class A surface/C).

In the book it's one page: halocarbon on the left, inert gas on the right. 10 seconds against 60, drawn side by side, and the 120-second exception for Class A surface and Class C in its own box.

Same with cross-zoning, CO2 life safety, wet chemical on a fryer, the door fan test and the inspection calendar: each one has its own page.

You see it, you get it, and you answer the client without going back to the standard.

COMPARE FOR YOURSELF

The Same Topic, Two Ways to Study It

THIS
  • The standard: line after line
  • Releasing sequences explained only in words
  • You walk up to the panel unsure
The releasing control unit shall receive initiating signals from automatic detection devices, manual release stations, abort stations and supervisory devices, each connected by monitored circuits arranged so that an open or ground condition results in a trouble signal. Upon receipt of the required initiating signals, the unit shall activate notification appliances, initiate the associated shutdown functions, including ventilation, dampers and electrical power where required, and, after any applicable time delay, energize the releasing circuit in accordance with the documented sequence of operation.
FOR THIS
  • The releasing panel in one drawing
  • Inputs and outputs in a box
  • You see it and you get it
Inputs: detectors, manual release, abort, supervisory. Outputs: alarms, shutdowns, release.
CONTENTS

Take a Look at the 8 Parts and 60 Topics

The special hazards map, detection and releasing panels, clean agent systems, CO2 systems, kitchen and dry chemical, foam and other systems, inspection and testing, and review checklists: 64 pages, all illustrated

IThe Special Hazards Map · pp. 5-10
  1. Why Water Isn't Always the Answer
  2. One System, Always the Same Order
  3. Which NFPA Standard Covers What
  4. How Agents Put Out Fire
  5. Total Flooding vs. Local Application
  6. Engineered vs. Pre-Engineered Systems
IIDetection and Releasing Panels · pp. 11-20
  1. The Releasing Panel, Drawn as a Box with Inputs and Outputs
  2. Detectors for Special Hazards
  3. High Airflow Rooms Need More Detectors
  4. Cross-Zoning: Two Detectors Before Discharge
  5. The Releasing Sequence, Step by Step
  6. Abort Switches: UL, IRI, NYC
  7. Manual Release and Where It Goes
  8. Solenoids, Actuators and Supervised Circuits
  9. Disabling the Release Before You Test
  10. Interlocks: HVAC, Dampers, Power, Doors
IIIClean Agent Systems (NFPA 2001) · pp. 21-31
  1. Halocarbon vs. Inert Gas Agents
  2. Design Concentration and Safety Factors
  3. Occupied Spaces: NOAEL and LOAEL
  4. Discharge Time: 10 Seconds and 60 Seconds
  5. Hold Time: Keeping the Agent in the Room
  6. Room Integrity and the Door Fan Test
  7. Pressure Venting the Enclosure
  8. Cylinders, Valves and Manifolds
  9. Pipe, Nozzles and Coverage
  10. Worked Example: Agent Quantity in One Room
  11. Altitude and Temperature Corrections
IVCarbon Dioxide Systems (NFPA 12) · pp. 32-39
  1. CO2 Kills: Life Safety First
  2. High Pressure vs. Low Pressure Storage
  3. Surface Fires vs. Deep-Seated Fires
  4. Local Application CO2
  5. Lockout Valve, Time Delay and Odorizer
  6. Warning Signs and Self-Contained Breathing Apparatus
  7. Weighing CO2 Cylinders
  8. Halon 1301 Systems Still in the Field
VKitchen and Dry Chemical Systems (NFPA 17A, 17, 96) · pp. 40-47
  1. Wet Chemical: How It Works on a Fryer
  2. The Hood System from Link to Nozzle
  3. Nozzle Placement by Appliance
  4. Fuel and Power Shutoff
  5. Manual Pull Station and Class K Extinguisher
  6. Fusible Links and Detection Lines
  7. Dry Chemical Systems (NFPA 17)
  8. Kitchen System Semiannual Service
VIFoam and Other Systems · pp. 48-51
  1. Foam Basics (NFPA 11)
  2. Low, Medium and High Expansion
  3. Proportioners and Foam Concentrates
  4. Water Mist and Hybrid Systems
VIIInspection, Testing and Maintenance · pp. 52-58
  1. Inspection Intervals at a Glance
  2. Clean Agent: Semiannual Agent and Pressure Check
  3. The Annual Clean Agent Inspection
  4. Cylinders: Visual Inspection and Hydrostatic Testing
  5. Hoses and Flexible Connectors
  6. Testing the Releasing Panel Safely
  7. Paperwork: Tags, Reports and Impairments
VIIIReview and Field Checklists · pp. 59-64
  1. Numbers to Know, on One Page
  2. Five Systems, One Route
  3. Common Mix-Ups
  4. Field Checklist: Clean Agent Room
  5. Field Checklist: Kitchen Hood System
  6. How the NICET Special Hazards Exam Is Organized

One Page, One Topic, All Clear

Think of it this way:

You're commissioning a clean agent room. The panel is armed, the detectors are up, and the supervisor wants you to walk him through the releasing sequence before anyone touches a solenoid.

You open the book to the releasing panel and see one box with arrows going in and out: detectors, manual release, abort and supervisory coming in; alarms, shutdowns and release going out.

Fryer before, during and after discharge: saponification plus cooling, UL 300 listed systems.

Same with halocarbon vs. inert gas, CO2 life safety, wet chemical on a fryer, foam proportioning and the inspection calendar: each one on its own page.

Special Hazards Suppression Illustrated is 8 parts and 60 topics, all drawn, and it ends with the numbers to know on one page, two field checklists and how the exam is organized.

What you see drawn, you don't have to memorize.

What's Inside Special Hazards Suppression Illustrated:

Ipp. 5-10

The Special Hazards Map

Why water isn't always the answer, the same order for every system, which NFPA standard covers what, how agents put out fire, total flooding vs. local application, engineered vs. pre-engineered.

IIpp. 11-20

Detection and Releasing Panels

Walk anyone through a release: the releasing panel as inputs and outputs, detectors, high airflow rooms, cross-zoning, the releasing sequence, abort switches, manual release, solenoids, disabling before testing and interlocks.

IIIpp. 21-31

Clean Agent Systems (NFPA 2001)

Halocarbon vs. inert gas, design concentration and safety factors, NOAEL and LOAEL, discharge and hold time, room integrity, venting, cylinders and manifolds, nozzles, a worked agent quantity example and corrections.

IVpp. 32-39

Carbon Dioxide Systems (NFPA 12)

Work around CO2 with the safety steps in order: life safety first, high vs. low pressure storage, surface and deep-seated fires, local application, lockout valve and odorizer, signs and SCBA, weighing cylinders and Halon 1301 still in the field.

Vpp. 40-47

Kitchen and Dry Chemical Systems (NFPA 17A, 17, 96)

Wet chemical on a fryer, the hood system from link to nozzle, nozzle placement, fuel and power shutoff, pull station and Class K extinguisher, fusible links, dry chemical and semiannual service.

VIpp. 48-51

Foam and Other Systems

Foam basics, low, medium and high expansion, proportioners and concentrates, water mist and hybrid systems.

VIIpp. 52-58

Inspection, Testing and Maintenance

The inspection calendar at a glance, the semiannual and annual clean agent checks, cylinders and hydrostatic testing, hoses, testing the panel safely and the paperwork.

VIIIpp. 59-64

Review and Field Checklists

The numbers to know on one page, five systems in one route, common mix-ups, two field checklists and how the exam is organized.

At the end of the book: The numbers to know on one page, two printable field checklists and a page on how the exam is organized.

Plus: 2 Free Books

Special Hazards Practice Questions: Exam-Style, With Answers Explained

BONUS 1: «Special Hazards Practice Questions: Exam-Style, With Answers Explained»

Value on its own: US$ 17.90

Test yourself on clean agents, CO2, releasing panels and inspection with exam-style questions, and see in one line why each answer is right.

The 15 Most Common Special Hazards Deficiencies, Before & After

BONUS 2: «The 15 Most Common Special Hazards Deficiencies, Before & After»

Value on its own: US$ 14.90

See the deficiencies techs find most often in the field, each one drawn wrong and then right, so you can spot them on your next inspection.

Special Hazards Suppression Illustrated with 2 Free Books

  • Special Hazards Suppression Illustrated: 64 illustrated pagesUS$ 63
  • BONUS 1: Special Hazards Practice Questions: Exam-Style, With Answers ExplainedUS$ 17.90
  • BONUS 2: The 15 Most Common Special Hazards Deficiencies, Before & AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT SPECIAL HAZARDS SUPPRESSION ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Special Hazards Suppression Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're moving into suppression

You're moving into suppression

Years in sprinklers or fire alarm, and now the company sends you to clean agent and CO2 rooms. Every system is laid out in the same order, so you see where each piece fits.

Your NICET Special Hazards exam is coming up

Your NICET Special Hazards exam is coming up

You study at night after a day in the truck. One topic per page, the numbers on one sheet, and a bonus book of exam-style questions to check yourself.

You already service these systems

You already service these systems

Print the pages you need and keep them in the truck: the releasing sequence, the inspection calendar and the field checklists, ready before you walk into the room.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT SPECIAL HAZARDS SUPPRESSION ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Special Hazards Suppression Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've worked in sprinklers or fire alarm for years?

Yes. It assumes you know the trade and starts where suppression is different: agents, releasing panels, room integrity and CO2 safety. If you're preparing for NICET Special Hazards Systems Level I or II, the last part explains how that exam is organized and the bonus book gives you exam-style questions. Every system follows the same order, so your years in the field help.

Where does the content come from?

From the current editions of NFPA 2001, 12, 12A, 17, 17A, 11, 72 and 96, explained in our own words and drawings. The values are checked against the current editions.

Is it official material?

No. It's an independent study book, not published or endorsed by NFPA, NICET, UL or any AHJ. It doesn't give you a certificate or continuing education credits: it's for studying and reviewing.

Does it replace manufacturer training or a course?

No. It's for studying and reviewing. Manufacturer training, the system manual and your AHJ always come first.

Are the practice questions the ones on the exam?

No. They're exam-style questions written for this book, each with a one-line explanation. They aren't official exam questions.

When and how does it arrive?

The book and the 2 bonus books arrive as a PDF by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. It's a PDF you can print at home or at a print shop and keep in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading NFPA at night with nothing sticking.

The releasing sequence: you see it drawn, and that's it.

You walk into the exam or the job knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT SPECIAL HAZARDS SUPPRESSION ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.